2K-Derocryl Lack DecontClear

Technical Specification
2K-Derocryl Lack DecontClear

Colours	Clearcoat.
Flash point	>23 °C
Temperature stability	Up to 120 (short-term up to 150) °C
Gloss	High glossy, appr. 90 U in 20° angle
Potential dry film thickness in one working process	20 up to 60 µm
Mixing ratio	Hardener HL 106
(Basis:hardener) by weight	1:1
(Basis:hardener) by volume	1:1
Pot life in hours	2
Viscosity	Appr. 20 sec running time (DIN 4 mm pot)
Density in kg/l	1
Solid content in %	50
Solid volume in %	44
Theoretical spreading capacity	11 m²/l at 40 µm DFT 11 m²/kg at 40 µm DFT
Recommended film thickness	100 µm WFT corresponds to 40 µm DFT
Drying (DIN EN ISO 1517)	40 µm DFT
Dust-dry (Tg1)	After 90 min
Touch-dry (Tg4)	After 6 h
Dry (Tg6)	After 8 h
Cured chemically	After 7 days

Note

• The specifications are related to the prepared mixture and are based on standard atmospheric conditions 23/50, DIN 50014.
• Lower temperatures and/or higher humidity will prolong drying and hardening.
• Application below +5 °C is not possible.

Safety information
2K-Derocryl Lack DecontClear

(See Security Data Sheet)

VOC-level	Appr. 500 g/l
Solvent content	Appr. 50 % by weight
Aromatic content	Appr. 25 % by weight

Storage
2K-Derocryl Lack DecontClear

Storage

• In dry, cool rooms, if possible frost-proof
• Ensure good ventilation

Shelf life

• 6 month from date of delivery when in unopened original containers in cool and dry conditions

Application methods
2K-Derocryl Lack DecontClear

Mixing ratio

• Stirr homogeneous, preferably with mechanical stirrer
• Mix base paint and hardener according to the mixing ratio as specified

Airless spraying

• Flow pressure 180 - 210 bar
• Nozzle size 0,009 - 0,011 inch (0,23 - 0,28 mm)
• Spraying angle according to the geometry and size of the object to be laquered

Compressed air spraying

• Spraying pressure 2 bar
• Nozzle size 1,3 - 1,6 mm

Electrostatic application

• Can be applied as delivered
• Conductance of the material: 700 kΩ

Dipping

• Can not be applied as delivered

Other methods

• Roller and brush application is inadvisable

Thinner

• Max. 5% Derocryl-Verdünnung

Cleaning

• Rinse immediately with Derocryl-Verdünnung

Preparation of support

• If necessary clean with high pressure-cleaner and turbo-cleaner-solution
• Clean primer of the coating system

General remarks

• During coating and drying the humidity should be min. 30 % / max. 85 %
• During coating and drying the environmental temperature should be min. 5°C / max. 30°C
• Object temperature at least 3° C above dew point.

Example for a system

• Clear laquer: 2K-Derocryl Lack DecontClear