2K-Derocryl Haftgrund EE

Technical Specification
2K-Derocryl Haftgrund EE

Colours	light grey, redbrown, green, grey. Other colours upon request.
Flash point	>23 °C
Temperature stability	-20 up to 120 (short-term up to 150) °C
Gloss	Silky mat
Potential dry film thickness in one working process	40 up to 60 µm
Mixing ratio	Hardener HL 106
(Basis:hardener) by weight	8:1
(Basis:hardener) by volume	6:1
Pot life in hours	3
Viscosity	Appr. 60 sec running time (DIN 4 mm pot)
Density in kg/l	1,3
Solid content in %	61
Solid volume in %	43
Theoretical spreading capacity	10,75 m²/l at 40 µm DFT 8,27 m²/kg at 40 µm DFT
Recommended film thickness	100 µm WFT corresponds to 40 µm DFT
Drying (DIN EN ISO 1517)	40 µm DFT
Dust-dry (Tg1)	After 30 min
Touch-dry (Tg4)	After 3 h
Dry (Tg6)	After 5 h
Cured chemically	After 7 days
Interval for overcoating	after 2 h with two component Derocryl topcoats

Note

• The specifications are related to the prepared mixture and are based on standard atmospheric conditions 23/50, DIN 50014.
• Lower temperatures and/or higher humidity will prolong drying and hardening.
• Application below +5 °C is not possible.

Safety information
2K-Derocryl Haftgrund EE

(See Security Data Sheet)

VOC-level	Appr. 491 g/l
Solvent content	Appr. 39 % by weight
Aromatic content	Appr. 25 % by weight

Storage
2K-Derocryl Haftgrund EE

Storage

• In dry, cool rooms, if possible frost-proof
• Ensure good ventilation

Shelf life

• 6 month from date of delivery when in unopened original containers in cool and dry conditions

Application methods
2K-Derocryl Haftgrund EE

Mixing ratio

• Stirr homogeneous, preferably with mechanical stirrer
• Mix base paint and hardener according to the mixing ratio as specified

Airless spraying

• Flow pressure 150 - 180 bar
• Nozzle size 0,011 - 0,015 inch (0,28 - 0,38 mm)
• Spraying angle according to the geometry and size of the object to be laquered

Compressed air spraying

• Spraying pressure 2 bar
• Nozzle size 1,3 - 1,8 mm
• Adjust to spraying viscosity (appr. 30 s DIN 4 mm) adding appr. 10 % Derocryl-Verdünnung (two component products: after mixing)

Electrostatic application

• Application is possible, provided that the material is set to the appropriate conductance for the system concerned

Dipping

• Can not be applied as delivered

Other methods

• Roller and brush application for repair work is possible

Thinner

• Max. 5% Derocryl-Verdünnung

Cleaning

• Rinse immediately with Derocryl-Verdünnung

Preparation of support

• Shot blasting to a purity according to SA 2½
• If necessary clean with high pressure-cleaner and turbo-cleaner-solution
• Sweeping for zinced supports
• Mill scale, welding residues, dust, soluble residues from chemical pretreatments and zinc reaction products which might reduce adhesion have to be carefully and thoroughly removed

General remarks

• During coating and drying the humidity should be min. 10 % / max. 85 %
• During coating and drying the environmental temperature should be min. 5°C / max. 30°C
• Object temperature at least 3° C above dew point.

Example for a system

• Primer coat: 2K-Derocryl Haftgrund EE
• Finish coat: