Deritex EE 30 Hydro
Water borne topcoat (zinc-phosphate) on alkyd copolymer basis. Free of lead, cadmium and chromium VI compounds.
General information
Deritex EE 30 Hydro
Field of application
- One-coat paint system for C2 high or topcoat with waterborne or solvent primer.
- For metal or corrosion protection coating according to DGNB.
- ChemVOCFarbV for metal coatings is met.
- Special setting for low pressure processing available (60s DIN 4 mm).
Product properties
- Water based
- Resistance to mineral oils
- Tolerant to a contaminated support
- Recoatable with itself
Technical Specification
Deritex EE 30 Hydro
| Colours |
RAL 5001, RAL-colour chart with exceptions, apart from RAL 9006/9007.
Other colours upon request. |
|---|---|
| Flash point | Not applicable |
| Temperature stability | Up to 120 (short-term up to 160) °C |
| Gloss | Silky mat, appr. 40 U in 85° angle |
| Potential dry film thickness in one working process | 60 up to 80 µm |
| Viscosity | Appr. 20 sec running time (DIN 6 mm pot) |
| Density in kg/l | 1,3 |
| Solid content in % | 57 |
| Solid volume in % | 43 |
| Theoretical spreading capacity |
|
| Recommended film thickness | 150 µm WFT corresponds to 60 µm DFT |
| Drying (DIN EN ISO 1517) | 60 µm DFT |
| Dust-dry (Tg1) | After 60 min |
| Touch-dry (Tg4) | After 6 h |
| Dry (Tg6) | After 24 h |
| Accelerated drying | 30 min. at 60°C possible, after 10 min. flash-off time |
| Interval for overcoating |
|
Note
- The specifications are based on standard atmospheric conditions 23/50, DIN 50014.
- Lower temperatures and/or higher humidity will prolong drying and hardening.
Safety information
Deritex EE 30 Hydro
(See Security Data Sheet)
| Solvent content | Appr. 3 % by weight |
|---|---|
| Aromatic content | Appr. 2 % by weight |
Storage
Deritex EE 30 Hydro
Storage
- In dry, cool rooms, frost-proof
- Ensure good ventilation
Shelf life
- 6 month from date of delivery when in unopened original containers in cool and dry conditions
Application methods
Deritex EE 30 Hydro
Airless spraying
- After using the material close the packings immediately
- It is tending to fast skinning. Do not stir the skin in any case!
- Flow pressure 120 - 160 bar
- Nozzle size 0,011 inch (0,28 mm)
- Spraying angle according to the geometry and size of the object to be laquered
Compressed air spraying
- Spraying pressure 3 - 4 bar
- Nozzle size 1 - 1,5 mm
- Adjust to spraying viscosity (appr. 40 s DIN 4 mm) adding appr. 5 % Water (two component products: after mixing)
Electrostatic application
- Application is possible, provided the equipment is suitable for water based materials
Dipping
- Can not be applied as delivered
Other methods
- Roller and brush application for repair work is possible
Thinner
- Max. 5% Water
Cleaning
- Rinse immediately with Water
- Residues are dissolvable with Derozink-Verdünnung
Preparation of support
- Shot blasting to a purity according to SA 2½
- If necessary clean with high pressure-cleaner and turbo-cleaner-solution
- Mill scale, welding residues, dust and dirt on the surface which might reduce adhesion have to be carefully and thoroughly removed
General remarks
- During coating and drying the humidity should be min. 30 % / max. 85 %
- During coating and drying the environmental temperature should be min. 5°C / max. 30°C
- Object temperature at least 3° C above dew point.
Example for a system
- Primer coat: Derogrund Hydro XT
- Finish coat: Deritex EE 30 Hydro
The general information and descriptions contained in this specification are provided to the best of our knowledge. Our information and specifications do not constitute warranted characteristics in the legal sense. Any advice for preparation and application which may be provided verbally, in writing or by means of experiments is of general nature only, and any property rights of third parties are also to be regarded in this context. Our general instructions do not release you from your obligation to check the suitability of the products supplied by our company for the intended methods and purposes of application. Particular in those cases when our supplied material will be applied with products from other sources. The products are prepared, applied and used outside of our sphere of control and thus fall solely within the user´s scope of responsibility.
Our general terms of sale and delivery apply as agreed.